Cold/Construction Joints | |
|
|
MC-2010MN comes packaged in 82ft. rolls and can be easily applied in construction / cold joints as shown here and in the following photos.
Check MC-2010MN data sheet for minimum requirements. (Concrete coverage, wall/slab thickness and wall height) |
|
|
To join two strips of MC-2010MN at a corner, butt them as shown here and place a bead of P-201 at the joint to ensure a tight seal. |
|
|
The connection should appear something like this after application of P-201. |
|
|
The best method of joining two strips of MC-2010MN is to overlap as shown here, using a small bead of P-201 in the area of overlap. |
|
|
P-201can be used in combination with MC-2010MN to seal around unusually shaped areas such as the one shown here. |
|
|
Place a small bead of P-201 under MC-2010MN when the concrete surface is particularly rough or uneven. |
|
|
Transition from smooth to rough concrete can be accommodated by using MC-2010MN and P-201 in combination as shown here. |
- Easy Links -
Site Map - Contacts - Characteristics - Products - Data Sheets - MSDS
Applications - Chemical Resistance - Concrete Coverage
Testing - Specification - Links
Web Site 1993 - 2008 JL Miller