Construction Joint

Construction/Cold Joints by Product

MC-2010MN	GENERAL USE - Cast-in-place non-moving joints. REQUIRMENT - Minimum of 4" of 4300+ psi concrete on both sides of the waterstop (minimum 9" wall /slab). Place in the center between two rows of rebar. Wall height must be a minimum of 6.5 feet. This product will withstand a high hydrostatic head. OVER 700 FOOT HEAD IN LABORATORY TESTS. Click on *"installation instructions"* for general installation information (pdf file). Click on *"typical application "* for photo examples.
MC-2005M	GENERAL USE: Cast-in-place joints with less than 50 foot hydrostatic head and less than 24" thick walls or slabs. Follow same installment criteria as MC-2010MN. Click on "*Ideal Installation Instructions*" for more info (pdf file). Check data sheet for detailed information.
KBA-1510FP	GENERAL USE - Cast-in-place non-moving joints (less than 20' hydrostatic head). Can be placed outside of rebar to protect rebar from moisture. Requires a minimum of 1.0" of 4300+ psi concrete coverage. Because of unknow concrete conditions we recommend 1.5" ~ 2.0" if possible. Excellent for 6" ~ 8" walls/slabs with single row of rebar or pins. Click on "*Data Sheet"* to view more detailed information.